Installation & Operation Manual 428 Document # LTRT-92224
Mediant 8000
[NUMBER OF CALL PROGRESS TONES]
Number of Call Progress Tones=9
#Call Waiting Tone
[CALL PROGRESS TONE #8]
Tone Type=9
Tone Form = 2 (Cadence)
Low Freq [Hz]=440
High Freq [Hz]=0
Low Freq Level [-dBm]=20 (-20dBm)
High Freq Level [-dBm]=0
First Signal On Time [10msec]=30
First Signal Off Time [10msec]=900
37.2.1.4 Editing the "Source" Call Progress Tones File
Use the default call progress tones file provided on the Media Gateway software
installation CD as a reference.
Modify the section according to your specific needs. For example, to change the dial
tone to 440 Hz only, replace the #Dial tone section with the following text:
#Dial tone
[CALL PROGRESS TONE #1]
Tone Type=1
Tone Form = 1
Low Freq [Hz]=440
High Freq [Hz]=0
Low Freq Level [-dBm]=10 (-10dBm)
High Freq Level [-dBm]=0
First Signal On Time [10msec]=300; the dial tone is detected after 3 sec
If the Call Progress Tones file contains multiple definitions of the same tone type:
The first definition is used for generation of specific tone
All definitions are used for detecting the specific tone
To Next Page
Loading...
