Version 6.6 779 October 2014
Installation & Operation Manual 44. Media Gateway Software Backup/Restore Procedures
5. The Backup file is stored in the EMS server. To view all available Backup files, in
the EMS menu, choose Tools -> MG Backup Files.
Figure
44-2: Backup files in the EMS
6. You may optionally store a copy of the backup file on an external file server (or
on the PC where your run the EMS client). To perform this task, in the MG
Backup Files screen, select backup file, right-click and choose the Save As
option from the drop-down menu.
To create a backup for the Media Gateway software via CLI:
1. Connect to the CLI interface on Active SC board. For more information,see
Section 'Connecting to the CLI via IP Network' on page 111.
2. Login as a regular CLI user with administrative privileges (e.g. acladmin) and
provide the password. For more information, see Section 'Logging into the
Command Line Interface' on page 115.
Note: Backup may also be performed when you are logged in as the root user.
However, for better accountability and easier backup file transfer, it is recommended
to use regular CLI user with administrative privileges for this purpose.
To Next Page
Loading...
