Installation & Operation Manual 178 Document # LTRT-92224
Mediant 8000
25.1 Configuring Connectivity between the Media
Gateway and the Syslog Server
To configure connectivity between the Media Gateway and the Syslog
server:
1. Click
to access the Media Gateway status screen.
2. In the Navigation pane, click Management and in the Configuration pane click
Management Settings;the Management Settings screen is displayed.
3. Configure the following parameters:
• External Syslog Server
• External Syslog Server IP Address
• External Syslog Server Port
25.2 Securing the Syslog Management Interface
For improved security, Syslog traffic from Media Gateway may be encrypted via
IPSEC/IKE security protocols.This is performed by configuring the corresponding SC
IPSEC Rule, as described in 'Configuring IPSEC/IKE for Management Interfaces (on
SC boards)' on page 341.
To Next Page
Loading...
