AudioCodes Mediant 8000 - Page 759

Version 6.6 759 October 2014
Installation & Operation Manual 43. Session Border Controller (SBC) Application
Parameter Name Type
Provisioning
Type
Description
Destination
Username Prefix
String
Up to 50 chars
Instant Defines the prefix of the user part of the
incoming SIP request's destination URI
(usually the Request URI).
To denote any destination username prefix
leave the field empty or use asterisk (*)
symbol.
Destination Host String
Up to 50 chars
Instant Defines the hostname of the incoming SIP
request's destination URI (usually the
Request URI) user part.
To denote any destination host leave the
field empty or use asterisk (*) symbol.
Additional
Manipulation
Enum
No, Yes
Instant Defines whether additional SIP URI user
part manipulation is performed for the table
entry rule listed directly above it.
No – Regular manipulation rule (not
performed in addition to the rule above it).
Yes – If the previous table row entry rule
matched the call, consider this row entry
as a match as well and perform the
manipulation specified by this rule.
Note: Additional manipulation can only be
performed on a different SIP URI (either
source or destination) to the rule
configured in the row above (defined by
the parameter ManipulatedURI).
Manipulated URI Enum
Source,
Destination
Instant Defines whether the source or destination
SIP URI user part is manipulated.
Source IP Group Integer
0-32
Instant Defines the IP Group from where the call
originated.
Typically, this IP Group is determined by
the Classification process. For more
information, see Source IP Group
Classification.
If not used (i.e., any IP Group), set to 0
(Any).
Dest IP Group Integer
0-32
Instant Defines the destination IP Group to where
the call will be sent.
Typically, this IP Group is determined by
Routing process.
If not used (i.e., any IP Group), set to 0
(Any).