Installation & Operation Manual 218 Document # LTRT-92224
Mediant 8000
Interface Separation ES boards Ports Allocation
Two: OLAN & WAN Use Port 20 for connection to the LAN network,
that carries OAM (management), Call Control and
Media traffic.
Use Port 22 for connection to the WAN network,
that carries Call Control and Media traffic.
If Link Aggregation is enabled, use Port 21 and
for additional connection to the LAN network.
Three: O & LAN & WAN Use Port 18 for connection to the OAM
(management) network.
Use Port 20 for connection to the LAN network,
that carries Call Control and Media traffic.
Use Port 22 for connection to the WAN network,
that carries Call Control and Media traffic.
If Link Aggregation is enabled, use Port 21 and
for additional connection to the LAN network.
To Next Page
Loading...
