Installation & Operation Manual 230 Document # LTRT-92224
Mediant 8000
5. Login to the Install server (EMS) as the root user via Telnet, SSH or X-terminal
(when connecting to the EMS server, you may need to login as acems user first,
and then switch to root user via the su – root command).
6. In the Install server (EMS), define the SC board as the "jumpstart client" (use the
SC hostname, IP address and MAC address defined in step 3)
EMS1:/ [root] => cd /jumpstart/Solaris_9_for_v6.6
EMS1:/ [root] => ./add_client.sh client224 10.7.13.94 0:3:ba:78:8e:65
7. Return to the RS-232 console terminal connected to the SC board and at the
prompt, type boot net - install and press Enter. Make sure to separate each
word with a space.
ok> boot net - install
The Solaris™ 9 OS installation takes between 10 to 30 minutes (depending on
the IP network bandwidth and throughput). During this process, the SC board is
rebooted. A message appears when the installation is complete and a login
prompt is displayed.
8. When the Solaris OS installation has completed, re-login to the Install Server
(EMS) as the root user via Telnet, SSH or X-Terminal and remove the SC
board's "jumpstart client" definitions (replace client224 with the actual SC name).
EMS1:/ [root] => cd /jumpstart/Solaris_9_904_v6.6/Solaris_9/Tools
EMS1:/ [root] => ./rm_install_client client224
To Next Page
Loading...
