AudioCodes Mediant 8000 - Page 300

Installation & Operation Manual 300 Document # LTRT-92224
Mediant 8000
32.1.2.5.2 Downloading the V5.2 User Ports Configuration File
A V5.2 User Ports Configuration file must be uploaded to the EMS Software Manager
and then downloaded to the specific TP-8410 Media Gateway board via Download
V5.2 Configuration Port File action. You may choose whether the specified V5.2
User Port configuration file is applied as "additional" V5.2 ports configuration (i.e.
incrementally added to the existing configuration) or as "entire" configuration (i.e. all
previous configuration is removed).
 To download the V5.2 User Ports Configuration File:
1. Upload the configuration file to the EMS Software Manager:
a. From the Tools menu, select Software Manager. The Software Manager
screen is displayed.
b. In the upper left corner, click
. The add Files screen is displayed.
c. In Auxiliary Files tab, select V5.2 Configuration File type.
d. Click
and choose the prepared V5.2 User Ports configuration file (stored
on your PC or on some network file server).
e. In the File Description field, type a meaningful description.
f. Click
to add the configuration file to the list.
g. Repeat steps c)-f) if you have several V5.2 User Port configuration files
h. Click OK. The files are uploaded to the EMS.
2. Ensure that all applicable V5.2 Interfaces are in the 'Offline' state
a. Access the V5.2 Interfaces List screen (as described in 'Configuring V5.2
Interfaces' on page 297).
b. Verify that all applicable V5.2 Interfaces are in the Offline state.
c. If some interfaces are not, right click on the corresponding entry and choose
the Offline action.
3. Download the V5.2 User Ports Configuration File to the TP-8410 Media Gateway
board:
a. Access the V5.2 Interfaces List screen (as described in 'Configuring V5.2
Interfaces' on page 297) and ensure that all applicable V5.2 Interfaces are in
the Offline state. If some interfaces are not, right click on the corresponding
entry and choose Offline action.
b. Click
to access the Gateway status screen.
c. Right-click on the specific TP-8410 Media Gateway board and choose
Maintenance -> Download V5.2 Configuration Ports File.
d. Choose whether the downloaded file contains "additional" or "entire" V5.2
User Ports configuration.
e. Choose the V5.2 User Ports file (uploaded to the EMS in the previous step)
and press OK.