Version 6.6 359 October 2014
Installation & Operation Manual 33. Configuring Security Settings
To set a new EEPROM password, at the prompt:
1. Connect to the CLI interface on the specific SC board. For more information, see
Section 'The Command Line Interface (CLI)' on page 107.
2. Login as root user. For more information, see Section 'Logging in as a Root User'
on page 115.
3. At the prompt, type eeprom security-password= and press Enter; do not forget
the trailing equal sign).
4. At the New Password prompt, type the new password and retype it at the Re-
enter password prompt.
client238::~# eeprom security-password=
Changing PROM password:
New password: password
Retype new password: password
To disable Open Boot PROM security:
1. Connect to the CLI interface on the specific SC board. For more information, see
Section 'The Command Line Interface (CLI)' on page 107.
2. Login as root user. For more information, see Section 'Logging in as a Root User'
on page 115.
3. At the prompt, type eeprom security-mode=none and press Enter.
client238::~# eeprom security-mode=none
Open Boot PROM security is disabled.
To Next Page
Loading...
