Version 6.6 363 October 2014
Installation & Operation Manual 33. Configuring Security Settings
3. At the prompt, type tools user and press Enter. The CLI USERS
MANAGEMENT menu is displayed.
client238::~# tools user
CLI USERS MANAGEMENT
list -- LIST: list CLI users
add -- ADD: add user
del -- DELETE: delete user
pwd -- PASSWORD: change user password
copy -- COPY: copy users & passwords from other SC
lock -- LOCK: lock user
unlock—UNLOCK: unlock user
force -- FORCE: force user to change password
4. At the Choose submenu prompt, type pwd and press Enter.
Choose submenu : pwd
CHANGE USER PASSWORD
5. At the User Name prompt, type root and press Enter.
User Name : root
6. At the New Password prompt, type the new password.
New Password:*******
7. At the Re-enter new Password prompt, type the new password again.
Re-enter new Password:*******
New password is configured on Active SC board and immediately replicated to
the Standby SC board. Therefore there is no need to repeat steps 1-7 on the
Standby SC.
8. In the EMS GUI, right-Click the specific Media Gateway in the MG Tree and
choose Details option from the menu.
9. Enter the new password in the Root password field and click OK button.
To Next Page
Loading...
