Installation & Operation Manual 366 Document # LTRT-92224
Mediant 8000
5. At the User Name prompt, type ems and press Enter.
User Name : ems
6. At the New Password prompt, type the new password.
New Password:*******
7. At the Re-enter new Password prompt, type the new password again.
Re-enter new Password:*******
The new password is configured on the Active SC board and immediately
replicated to the Standby SC board. Therefore there is no need to repeat steps 1-
7 on the Standby SC.
8. In the EMS GUI, right-Click the specific Media Gateway in the MG Tree and
choose Details option from the menu.
9. Enter the new password in the Ems Password field and click OK button.
To Next Page
Loading...
