Version 6.6 393 October 2014
Installation & Operation Manual 33. Configuring Security Settings
3. At the prompt, type tools ssh_key and press Enter. The SSH Key Management
menu is displayed.
SSH KEY MANAGEMENT
list -- LIST: list authorized keys
add -- ADD: authorize new key
del -- DELETE: delete key authorization
4. At the Choose submenu prompt type add and press Enter.
Choose submenu : add
ADD AUTHORIZED SSH KEY
5. Enter the name of the public key file that you transferred to the Active SC board
and press Enter.
Enter public key filename ([id_rsa.pub]) : id_rsa.pub
6. The public key will be parsed and keys from it will be added to the authorized
keys list. You will be informed on the progress of the operation.
Parsing public key file id_rsa.pub
Adding RSA public key "rsa-key-20081127"
done
Note: Authorized SSH keys, provisioned on the Active SC board, may also be used
for connecting to the CLI interface on the Standy SC boards. The Mediant 8000
software automatically replicates all required information between the Active and the
Standby SC boards. Therefore there is no need to manually authorize SSH keys on
the Standby SC board.
To Next Page
Loading...
