Version 6.6 443 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
usually appears in MFR2 tables.
• EV_NO_ANI - When dialing MF and no ANI was specified by the outgoing
user. (MFCR2 protocols specifications should define what to do when no ANI
digits are available. Usually I-12 is sent).
Note: MF digit is MF R1 or R2-FWD or R2-BWD according to the context, protocol
type and call direction.
• EV_ACCEPT - When using accepting a call (used only in MFC/R2) with
CALLED_IDLE as its reason parameter.
• EV_REJECT_BUSY - When rejecting a call with CALLED_BUSY as its
reason parameter.
• EV_REJECT_CONGESTION - When rejecting a call with
CALLED_CONGESTION reason.
• EV_REJECT_UNALLOCATED - When rejecting a call with
CALLED_UNALLOCATED reason.
• EV_REJECT_RESERVE1 - When rejecting a call with CALLED_RESERVE1
reason.
• EV_REJECT_RESERVE2 - When rejecting a call with CALLED_RESERVE2
reason.
Miscellaneous:
• EV_DIALED_NUM_DETECTED - (Incoming call) dialed destination number
is collected after START_COLLECT was previously activated and the
condition for incoming_call_detected event is satisfied (see ST_INIT for
conditions details).
• EV_DIAL_ENDED - Dialing initiated by table SEND_DEST_NUM is
completed (last digit has been sent).
• EV_ANI_NUM_DETECTED - This action is used to inform the script file of a
successful reception of the ANI digits string, or when timeout of digit waiting
occurs. This is reported at the incoming call detected event, when the ANI
flag is YES.
• EV_FIRST_DIGIT - Reception of first digit out of the incoming digit string.
Used in the FXO protocols, where informing the script of receiving of the first
digit, enables the script to use the SEND_PROG_TON function to stop the
dial tone.
37.5.1.6.2 Function
The function column holds the name of the function to be activated when the action
specified in the action/events field occurs. Select the functions from the list of eight
functions defined in CasSetup.h. (e.g., START_COLLECT). When NONE is specified
in this column, no function is executed.
To Next Page
Loading...
