Version 6.6 457 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
Once you have configured the dial plan file, you need to assign the tag prefixes to
the trunk groups. In this example, you assign one tag to the trunk group "Local"
for local calls, and another to the trunk group "Long" for long distance calls.
a. Click
to access the Media Gateway status screen.
b. Select the specific Media Gateway board.
c. In the Navigation pane, select SIP
GW/IP to IP Routing IP to
Tel/Inbound; the SIP IP to Tel Routing List is displayed.
d. Use the
to add an entry.
e. Select the new row and then in the Configuration pane, select SIP Routing
IP to Tel Settings; the SIP Routing IP to Tel Settings screen is displayed.
f. In the "Dest Phone Prefix" field, set the value 'LOCL' and the "Trunk Group
ID" to '1'. This rule is assigned to local Trunk Group '1'.
g. Repeat steps 4 and 5 and then in the "Dest Phone Prefix" field, set the value
'LONG' and and the "Trunk Group ID" to '2'. This rule is assigned to a long
distance Trunk Group '2'.
3. Configure phone number manipulation for local and long distance calls:
In this example, you set two manipulation rules, one for local calls and another for
long distance calls.
a. In the Navigation pane, select SIP
GW/IP to IP Manipulation Dest
Number IP to Tel; the Manipulation Dest IP to Tel list is displayed.
b. Use the
to add an entry.
c. Select the new row and then in the Configuration pane, select SIP
Manipulations Dest IP to Tel; the SIP Manipulations Dest IP to Tel
screen is displayed.
d. In the "Destination Prefix" field, set to 'LOCL'.
e. In the "Num Of Stripped Digits Left" field, set to '4'.
f. Repeat steps 2-3 and then in the "Destination Prefix" field, set to 'LONG' and
in the "Num Of Stripped Digits Left" field, set to '4'.
4. Apply the dial plan to a Tel Profile for a specific board:
a. In the Navigation pane, select SIP
GW/IP to IP Trunk Groups Tel
Profile; the Profiles Tel List is displayed.
b. Use the
to add an entry.
c. Select the new row and then in the Configuration pane, click SIP Profiles
Tel Settings; the SIP Profiles Tel Settings screen is displayed.
d. In the Dial Plan index drop-down list, choose the desired Dial Plan number.
To Next Page
Loading...
