AudioCodes Mediant 8000 - Page 484

Installation & Operation Manual 484 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type
Provisioning
Type
Description
# Aborts
Before OOS
(M)
Integer
0 – 10
Online Defines the number of aborted proving
attempts before sending an out-of-
service indication to Layer 3. Refer to
ITU-T Q.703 for details.
Note that the proving attempts is part of
the process of establishing a connection
between two points in an SS7 network.
Alignment
Ready Timer
(T1)
Integer
0 – 100000
Online Defines the Alignment Ready timer (T1).
Refer to ITU-T Q.703 for details.
Not Aligned
Timer (T2)
Integer
0 – 200000
Online Defines the Not Aligned timer (T2). Refer
to ITU-T Q.703 for details.
Aligned
Timer (T3)
Integer
0 – 20000
Online Defines the Aligned timer (T3). Refer to
ITU-T Q.703 for details.
Normal
Proving
Period (T4n)
Integer
0 – 15000
Online Defines the Normal Proving Period
(T4n). Refer to ITU-T Q.703 for details.
Emergency
Proving
Period (T4e)
Integer
0 – 5000
Online Defines the Emergency Proving Period
(T4e). Refer to ITU-T Q.703 for details.
Sending SIB
Timer (T5)
Integer
0 – 2400
Online Defines the Sending SIB Timer (T5).
Refer to ITU-T Q.703 for details.
Remote
Congestion
Timer (T6)
Integer
0 – 10000
Online Defines the Remote Congestion Timer
(T6). Refer to ITU-T Q.703 for details.
Excess Ack
Delay Timer
(T7)
Integer
0 – 5000
Online Defines the Excess Ack Delay Timer
(T7). Refer to ITU-T Q.703 for details.
LSSU Length Integer
1 – 2
Online Defines the LSSU length in bytes. Refer
to ITU-T Q.703 for details.
PCR N2 Integer
0 – 512
Online Defines Preventive Cyclic
Retransmission - the number of
message signal unit octets available for
retransmission. Refer to ITU-T Q703 for
details.