AudioCodes Mediant 8000 - Page 528

Installation & Operation Manual 528 Document # LTRT-92224
Mediant 8000
Parameter Name Type Provisioning Type Description
PCM Input Gain Integer
-31 – 31
Instant Defines the Pulse-code
modulation (PCM) input
gain control (in
decibels).
This parameter sets the
level for the received
(PSTN-to-IP)
signal.
Silence Suppression Enum
Disable, Enable,
Enable Without
Adaptation
Instant Silence Suppression is
a method for
conserving bandwidth
on VoIP calls by not
sending packets when
silence is detected.
 Disable – Silence
Suppression is
disabled.
 Enable – Silence
Suppression is
enabled.
 Enable Without
Adaptation – a
single silence packet
is sent during a
silence period
(applicable only to
G.729).