Installation & Operation Manual 596 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type
Provisioning
Type
Description
Default Release
Cause
Integer
1 – 350
Instant Defines the default Release Cause to IP for
IP to Tel calls. Used when the gateway
initiates a call release. If an explicit matching
cause for this release isn't found, a default
release cause can be configured: The
default release cause is
NO_ROUTE_TO_DESTINATION(3). Other
common values are NO CIRCUIT
AVAILABLE (34), DESTINATION OUT OF
ORDER (27), etc.
Note: The default release cause is described
in the Q.931 notation, and is translated to
corresponding SIP 40x or 50x values. For
example, 404 for 3, 503 for 34, and 502 for
27.
To Next Page
Loading...
