Version 6.6 631 October 2014
Installation & Operation Manual 40. General SIP Configuration
Parameter
Name
Type
Provisioning
Type
Description
Application
Type
Enum
GwIp2Ip, SAS,
SBC
Instant Defines the application type associated
with this SIP interface.
GW/IP2IP – IP-to-IP routing application and
regular gateway functionality
SAS – Stand-Alone Survivability (SAS)
application
SBC – Session Border Controller
application
UDP Port Integer
1-65534
Instant Defines the listening and source UDP port.
Note: This port must be outside of the RTP
port range.
TCP Port Integer
1-65534
Instant Defines the listening TCP port.
Note: This port must be outside of the RTP
port range.
TLS Port Integer
1-65534
Instant Defines the listening TLS port.
Note: This port must be outside of the RTP
port range.
SRD Integer
0-32
Instant Index of the associated SRD.
Message Policy Integer 1-5 Instant Associates Message Policy to SIP
interface.