Installation & Operation Manual 694 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type Provisioning
Type
Description
Remote
Base UDP
Port
Integer
0-64000
Instant Determines the lower boundary
of UDP ports used for RTP,
RTCP and T.38 by a remote
gateway. If this parameter is set
to a non-zero value,
ThroughPacket is enabled. Note
that the value of
RemoteBaseUDPPort on the
local gateway must equal the
value of BaseUDPPort of the
remote gateway. The gateway
uses these parameters to
identify and distribute the
payloads from the received
multiplexed IP packet to the
relevant channels.
To Next Page
Loading...
