AudioCodes Mediant 8000 - Page 707

Version 6.6 707 October 2014
Installation & Operation Manual 41. PSTN Gateway and IP-to-IP Applications
Parameter
Name
Type Provisioning
Type
Description
SBC
Alternative
DTMF
Method
Enum
Transparent,
InBand,
INFOCisco,
INFONortel,
INFOKorea
Instant The devices first priority for
DTMF method at each leg is
RFC 2833. Therefore, if a
specific leg negotiates RFC
2833 successfully, then the
chosen DTMF method for this
leg is RFC 2833. For legs where
RFC 2833 is not negotiated
successfully, the device uses
this parameter to determine the
DTMF method for the leg.
SBC Assert
Identity
Enum
NotConfigured,
DontCare,
AddPAssertedIdentity,
RemovePAssertedIdentity
Instant SBC Assert Identity.
SBC
Allowed
Coders
Group ID
Integer
0 – 5
Instant Select Allowed Coders Group
table
SBC
Allowed
Coders
Mode
Enum
Restriction,
Preference,
RestrictionAndPreference
Instant Determines the application
behavior refer to the Allowed
Coder Group.
 Restriction: Removes coders
from the SDP that are not in
the Allowed Coders Group#.
 Preference: Organizes the
coders in the SDP according
the order of coder in Allowed
Coders Group#.
 Restriction And Preference:
Restriction &Preference is
performed.
SBC
Diversion
Mode
Enum
Disable, Add, Remove
Instant . Defines the Diversion header
behavior
SBC History
Info Mode
Enum
Disable, AddInfo, RemoveInfo
Instant Defines the History Info header
behavior.