AudioCodes Mediant 8000 - Page 728

Installation & Operation Manual 728 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type
Provision
ing Type
Description
SBC
Unclassified
Calls
Enum
Reject, Allow
Instant Defines treatment for calls
(incoming packets) that cannot be
classified into a Source IP Group
(i.e. classification process fails).
 Reject – the call is rejected if
classification fails.
 Allow – if classification fails,
the incoming packet is
assigned to the default IP
Group of the default SRD (and
the call is subsequently
processed).
SBC Direct
Media
Enum
Disable, Enable
Instant Defines the SBC media anchoring
behavior:
 Disable – all cross SRD's calls
via SBC are not direct media
(internal SRD calls are
according to the SRD
configuration).
 Enable – all calls via SBC are
direct media.
SBC No
Answer
Timeout
[Sec]
Integer
0 - 3600
Instant Defines the timeout (in seconds)
for SBC outgoing (outbound IP
routing) SIP INVITE messages. If
the called IP party does not
answer the call within this user-
defined interval, the device
disconnects the session. The
device starts the timeout count
upon receipt of a SIP 180 Ringing
response from the called party. If
no other SIP response (for
example, 200 OK) is received
thereafter within this timeout, the
call is released.