AudioCodes Mediant 8000 - Page 764

Installation & Operation Manual 764 Document # LTRT-92224
Mediant 8000
Table 43-13: SIP SBC Message Manipulation Table
Parameter Name Type
Provisioning
Type
Description
Action Type ENUM
Add,
Remove,
Modify,
AddPrefix,
AddSuffix,
RemoveSuffix,
RemovePrefix
Instant The type of manipulation to perform.
 [0] Add (default) = adds new
header/param/body (header or
parameter elements).
 [1] Remove = removes
header/param/body (header or
parameter elements).
 [2] Modify = sets element to the new
value (all element types).
 [3] Add Prefix = adds value at the
beginning of the string (string element
only).
 [4] Add Suffix = adds value at the end
of the string (string element only).
 [5] Remove Suffix = removes value
from the end of the string (string
element only).
 [6] Remove Prefix = removes value
from the beginning of the string (string
element only).
Action Value String
Up to 200 chars
Instant Value (string) that you want to use in the
manipulation.
The syntax is as follows:
string/<message-element>/<call-param>
"+" string/<message-element>/<call-
param>
Row Role ENUM
CurrentCondition,
PreviousCondition
Determines which condition must be used
for the rule of this table row.
 [0] Use Current Condition = The
condition entered in this row must be
matched to perform the defined action
(default).
 [1] Use Previous Condition = The
condition of the rule configured directly
above this table row must be used to
perform the defined action.This option
allows you to configure multiple actions
for the same condition.