AudioCodes Mediant 8000 - Page 896

Installation & Operation Manual 896 Document # LTRT-92224
Mediant 8000
The following data illustrates example output for the Cisco command show running-
config for the 3560_G2 switch:
port-channel load-balance dst-ip
!
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
!
interface Port-channel2
!
interface Port-channel3
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet0/2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet0/3
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet0/4
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
channel-group 3 mode active
!
interface GigabitEthernet0/10
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12
switchport mode trunk
channel-group 1 mode active
!
interface GigabitEthernet0/11
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10-12