AudioCodes Mediant 8000 - Page 916

Installation & Operation Manual 916 Document # LTRT-92224
Mediant 8000
Configuring the Mediant 8000 Subnets ....... 891
Configuring the MGCP/MEGACO Protocols
................................................................. 277
Configuring the MTP3/M3UA Application ... 475,
485, 499, 504
Configuring the Number Manipulation Tables
......................................................... 658, 659
Configuring the PSTN Subsystem ............... 459
Configuring the Redirect Number Manipulation
IP to Tel Routing ...................................... 662
Configuring the Redirect Number Manipulation
Tel to IP Routing ...................................... 663
Configuring the SBC Message Manipulation
Table ........................................................ 763
Configuring the SIP SRV to IP Table .......... 626
Configuring the SS7 Subsystem ................. 472
Configuring the Syslog Server ..................... 845
Configuring the User Environment (Cisco L3
switch) .............................................. 889, 893
Configuring the V5.2 Access Gateway ........ 296
Configuring Trunks for the V5.2 Access
Gateway application ................................. 296
Configuring V5.2 Interfaces .........297, 300, 301
Configuring V5.2 Links ................................ 298
Configuring V5.2 User Ports ........................ 299
Configuring VLAN Tags ............................... 188
Configuring VLAN Tags for Media and Control
Subnets .................................................... 189
Configuring VLAN Tags for OAM Subnet ... 189,
196, 215
Connecting Cables to Media Gateway's RTM
Module ..................................................... 797
Connecting E1/T1 PSTN Cables (TP-8410
Boards) ..................................................... 125
Connecting IP Network Cables ................... 121
Connecting Mediant 8000 to IP Network .... 185
Connecting STM-1/OC-3 PSTN Cables .... 123
Connecting the Media Gateway to the IP
Network ............. 96, 117, 123, 179, 783, 881
Connecting the Mediant 8000 to the IP
Network ........................... 117, 185, 217, 839
Connecting the T3 PSTN Interfaces ........... 125
Connecting to External Telco Alarm Equipment
................................................................. 127
Connecting to the CLI via an RS-232 Serial
Console .. 109, 115, 118, 181, 364, 843, 882,
886
Connecting to the CLI via the IP Internet
Network ................... 112, 115, 171, 779, 785
Connecting to the IP Network 89, 117, 180, 843
Connecting to the PSTN Network . 89, 123, 467
Constraints for Adding Boards to the Mediant
8000 System ........................................... 798
Converting CAS File to Binary Format........ 451
Converting External Coders File to Binary
Format ............................................. 453, 455
Converting the Call Progress Tones File to
Binary Format .................................. 423, 429
Cooling System ............................................. 43
Creating a New CLI User ............................ 370
Creating a Pre-Recorder Tones File ... 430, 431
Creating a Voice Prompts File .................... 433
Creating IP Network Profile ........................ 201
Creating the Media Gateway Software Backup
......................................................... 778, 788
Customer’s Log Area .................................. 871
D
Deleting a CLI User..................................... 372