Avaya Definity SI - Page 1136

Maintenance Object Repair Procedures
555-233-123
10-350 Issue 4 May 2002
Table 10-134. TEST #693 Memory Card Erase/Write/Read Test
Error
Code
Tes t
Result Description/Recommendation
1192 ABORT Applications are accessing the memory card.
1. Wait 10 minutes for the applications to complete.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
2012
2106
2114
ABORT Internal system error.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this
test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the problem persists, escalate the problem.
2110
2111
ABORT
ABORT
Memory card not present.
Switch does not recognize the memory card.
1. Insert a formatted memory card into the slot at the
TN2401/TN794 NetPkt or TN777B Netcon circuit pack.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
2112 ABORT Memory card is a system-upgrade memory card.
1. Replace the inserted memory card with a user’s memory
card.
2. Retry the command at 1-minute intervals, up to 5 times.
3. If the problem persists, escalate the problem.
2113 ABORT Memory card has only one directory file.
1. Verify the Memory Card Directory Recovery Test (#699)
result (test card-mem).
2. If the problem persists, replace the memory card.
3. Retry the command at 1-minute intervals, up to 5 times.
4. If the problem persists, escalate the problem.
Continued on next page