FW-DWNLD (Firmware Download)
Issue 4 May 2002
10-855555-233-123
5. Type bin and press Enter.
This transfers files in binary format.
6. Type put <filename.ext> and press
Enter.
This command copies the new firmware image file to the destination
directory.
7. Type dir and press
Enter.
Verify that the new firmware image file is on the circuit pack.
8. Type quit and press Enter.
This ends the FTP session.
Verify files
From the SAT verify that the new firmware image file is on the circuit pack.
1. Type list directory board <UUCSS> and press
Enter.
The List Directory screen (Screen 10-9) displays.
2. Verify that the new firmware image file is listed in the File/Directory
Name field.
Screen 10-9. List Directory screen
Schedule download
1. Fill in all of the fields in Table 10-306 except the Target Location field.
NOTE:
If you are scheduling firmware downloads for a circuit pack that is
designated as primary/secondary sync (timing) source (for example,
TN464GP), this procedure automatically redesignates a local timing
source during the download. After the download is complete and the
circuit pack is returned to service, the procedure designates the
original circuit packs as the timing source.
list directory board 1C12 Page 1
LIST DIRECTORY
Board File/Directory Creation Size
Location Name Date Time Kb
01C12 F:fwdlimg464gv01 2000/01/01 00:00:00 367
01C13 F:fwdlimg2302av01 2000/02/29 23:59:59 493
D = Directory F = File
To Next Page
Loading...
