Maintenance Object Repair Procedures
555-233-123
10-924 Issue 4 May 2002
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order they are presented in Table 10-335. By clearing error
codes associated with the Control Channel Loop Test, for example, you may also
clear errors generated from other tests in the testing sequence.
Control Channel Looparound Test (#52)
This test queries the circuit pack for its circuit pack code and vintage and verifies
its records.
Table 10-335. System Technician-Demanded Tests
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence D/ND
1
1 D = Destructive; ND = Nondestructive
Control Channel Loop Test (#52) X X ND
SAKI Sanity Test (#53) X X D
IP Address Query (#1371) X X D
NIC Query Test (#1383) X X ND
Local Ping Test (#1379) X X ND
MP Diagnostic Test (#1406) X X D
Table 10-336. TEST #52 Control Channel Looparound Test
Error
Code
Te st
Result
Description/Recommendation
None
2100
ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals a
maximum of 5 times.
Continued on next page
To Next Page
Loading...
