ATM Tips
Issue 4 May 2002
5-81555-233-123
Screen 5-19. Screen output A500: show signaling esi command
Check that Addresses registered (use admin signaling esi add)
match those administered in DEFINITY.
■ If an address or End System Identifier is missing or incorrect on the
A500 port associated with the PPN, the EAL and PACL links will
come up, but one-way talk paths may result. (The ATM network can
route from the PPN to the EPN, which creates the bidirectional EAL
and PACL signaling channels and one side of the talk path.)
■ If an address or End System Identifier is missing or incorrect on the
A500 port associated with the EPN, the links will not come up
between the PPN and the EPN.
4. Enter show sys interfaces on the A500 console. Screen 5-20 on page
5-82 shows the screen output.
A500:show signaling esi
Addresses registered on A1.1
----------------------------
* 45.0001.01303538105300000000.000000000011.00
Addresses registered on A1.2
----------------------------
* 45.0001.01303538105300000000.000000000012.00
( * - configured )
To Next Page
Loading...
