Maintenance Object Repair Procedures
555-233-123
10-1278 Issue 4 May 2002
Packet Control Error Counter Read and Clear Test
(#583)
This test involves reading and clearing the error counters on the Packet Control
circuit pack. The test is performed by sending multiple maintenance requests to
the Packet Control circuit pack and waiting for the response to each of the “read
and clear” commands from the circuit pack.
Table 10-479. TEST #583 Packet Control Error Counter Read/Clear Test
Error
Code
Te s t
Result Description/Recommendation
1029
2011
2012
2013
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
ABORT Refer to STBY-SPE Maintenance documentation for a
description of these error codes.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5
times.
Continued on next page
To Next Page
Loading...
