PROCR (TN2404/TN790 RISC Processor Circuit Pack)
Issue 4 May 2002
10-1429555-233-123
Processor Cache Test (#895)
This test is a nondestructive test. This test overwrites the contents in the
Instruction and Data Caches, requiring them to be refilled during normal
execution.
This test verifies that the Processor Instruction and Data Caches are functional.
Some errors in the caches will simply reduce performance by forcing instructions
or data to be read from memory more often than would normally be necessary. In
any case, cache problems are serious and the Processor circuit pack must be
replaced as soon as possible if they are detected.
Table 10-540. Test #895 Processor Cache Test
Error
Code
Te s t
Result Description/Recommendation
100 ABORT The test did not complete within the allowable time period.
1. Retry the command.
1029
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
ABORT Refer to STBY-SPE Maintenance documentation for a
description of these error codes.
2500 ABORT Internal system error
1. Retry the command.
FAIL The Processor cache is not functioning correctly.
1. Replace the Processor circuit pack immediately.
NOTE:
If you replace the Processor circuit pack, you
need to obtain a new license file.
PASS The cache portion of the Processor circuit pack is operating
correctly.
Continued on next page
To Next Page
Loading...
