TAPE-DAT (Tape Consistency)
Issue 4 May 2002
10-1645 555-233-123
9 FAIL The translations and announcements are different in both
SPEs. The Active SPE is the most current.
10 FAIL The translations and announcements are different in both
SPEs. The Standby SPE has the most current translations,
and the Active SPE has the most current announcements.
1. Issue save translations to save translations in both
SPEs.
2. Issue save announcements to save announcements in
both SPEs.
3. If both the translation save and announcement save pass
on both SPEs, issue test tape long again to resolve the
alarms.
12 FAIL Load vintages and announcements are different in both SPEs.
The Active SPE has the most current announcements.
13 FAIL The translations, announcements, and load vintages are
different in both SPEs. The Active SPE has the most current
translations and announcements.
14 FAIL The translations, announcements, and load vintages are
different in both SPEs. The Standby SPE has the most current
translations, and the Active SPE has the most current
announcements.
1. Follow the procedures for Error Code 4. Be sure to issue
save announcements.
16 FAIL Announcements are different in both SPEs. The Standby SPE
has the most current announcements.
1. Follow the procedures for Error Code 8.
Table 10-607. TEST #421 Tape Data Consistency Check Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
