Maintenance Object Repair Procedures
555-233-123
10-1646 Issue 4 May 2002
17 FAIL The translations and announcements are different in both
SPEs. The Active SPE has the most current translations and
the Standby SPE has the most current announcements.
18 FAIL The translations and announcements are different in both
SPEs. The standby SPE is the most current.
1. Follow the procedures for Error Code 9.
20 FAIL Load vintages and announcements are different in both SPEs.
The Standby SPE has the most current announcements.
21 FAIL The translations, announcements, and load vintages are
different in both SPEs. The Active SPE has the most current
translations and the Standby SPE has the most current
announcements.
22 FAIL The translations, announcements, and load vintages are
different in both SPEs. The Standby SPE has the most current
translations and announcements.
1. Follow the procedures for Error Code 4. Be sure to issue
the save announcements command.
32 FAIL The update files are different in both SPEs. The update file on
the Active SPE is the more current one.
1. Have INADS issue copy update-file. If the update file
copy passes, proceed to Step 2.
2. Reissue test tape long to resolve the alarms.
33 FAIL The update files and translations are different in both SPEs.
The Active SPE has the most current update file and
translations.
34 FAIL The update files and translations are different in both SPEs.
The Active SPE has the most current update file, and the
Standby SPE has the most current translations.
1. Issue the save translations command to save
translations on both SPEs.
2. Have INADS issue copy update-file to copy the update
file from the Active SPE to the Standby SPE.
3. Reissue test tape long to resolve the alarms.
Table 10-607. TEST #421 Tape Data Consistency Check Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
