Maintenance Object Repair Procedures
555-233-123
10-1648 Issue 4 May 2002
44 FAIL The update files, load vintages, and announcements are
different in both SPEs. The Active SPE has the most current
update file and announcements.
45 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Active SPE
has the most current update file, translations, and
announcements.
46 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Active SPE
has the most current update file and announcements, and the
Standby SPE has the most current translations.
1. Follow the procedures for Error Code 4 to get the correct
load vintage. Be sure to save announcements. After
running test tape long , check for Error Code #32 or #64.
Follow the recovery procedure under the applicable error
code.
48 FAIL The update files and announcements are different in both
SPEs. The Active SPE has the most current update file, and
the Standby SPE has the most current announcements.
1. Follow the procedures for Error Code 40.
49 FAIL The update files, translations, and announcements are
different in both SPEs. The Active SPE has the most current
update file and translations, and the Standby SPE has the
most current announcements.
50 FAIL The update files, translations, and announcements are
different in both SPEs. The Active SPE has the most current
update file, and the Standby SPE has the most current
translations and announcements.
1. Follow the procedures for Error Code #41.
Table 10-607. TEST #421 Tape Data Consistency Check Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
