Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-140 Issue 4 May 2002
Hardware Groups
Enter one of the following hardware groups:
carriers all
Displays all circuit packs administered and/or physically
inserted in the port, switch node, and control carriers on the
system.
board PCSS
Displays all assigned ports on the circuit pack specified by
cabinet, carrier, and slot.
carrier c
Displays all circuit packs and assigned ports on a specified
carrier.
control
Displays all circuit packs in the control complex.
ds1
Displays all the DS1 (TN722, TN767, and TN464) port circuit
packs administered and/or physically inserted.
port-
network pn#
Displays all circuit packs located in a specified port network.
(The list cabinet command gives the port network number(s)
associated with a particular cabinet.) Circuit packs on switch
node carriers are not displayed when the port-network qualifier
is entered. To display switch node circuit packs, use the all,
carrier or board qualifiers.
stations
Displays all circuit packs that can be assigned stations,
including DS1 circuit packs for remote stations.
trunks
Displays all circuit packs that can be used for administering
trunks.
To Next Page
Loading...
