refresh route-table
Issue 4 May 2002
8-249555-233-123
Instructions
1. At the switch terminal type refresh route-table and one of the following
qualifiers:
■ all (Screen 8-22)
■ location (CCcss) See examples in the Board Location field in
Screen 8-23.
and press Enter.
Screen 8-22. Refresh route-table all
Use the information in Field descriptions (refresh route-table) to interpret the
report.
Screen 8-23. Refresh route-table 01B11
Use the information in Field descriptions (refresh route-table) to interpret the
report.
refresh route-table all Page 1 of 1
C-LAN Board Location Number of Routes Removed Number of Routes Added
01B11 7 0
01B12 0 0
01B13 0 1
01C05 2 0
01C06 3 0
01C07 0 0
01C08 15 2
01C09 2 0
01C10 5 0
01C11 9 0
Refresh Route Table Is Completed
refresh route-table 01B11 Page 1 of 1
C-LAN Board Location Number of Routes Removed Number of Routes Added
01B11 7 0
Refresh Route Table Is Completed
To Next Page
Loading...
