status bri-port
Issue 4 May 2002
8-315555-233-123
BRI,
ASAI
64-
126
L3-
Established
blank yes Technicians conduct SPID
facilitation tests on the port. Links
are not associated with BRI port
endpoints. See description of SPID
Facility Test Procedures in the
‘‘BRI-SET, ASAI-ADJ, BRI-DAT’’
Maintenance documentation.
BRI 64-
126
L3-
Established
ext yes Technicians conduct SPID
facilitation tests on the port. Links
are associated with port endpoints.
See description of SPID Facility
Test Procedures in the ‘‘BRI-SET,
ASAI-ADJ, BRI-DAT’’ Maintenance
documentation.
BRI 0-126 L3-
Established
blank blank Invalid SPID assigned to link.
1. Change the SPID value in the
BRI endpoint to match the SPID
administered to the BRI
endpoint on the port. Verify the
repair by executing the status
bri-port PCSSpp command.
Determine that the L2 state of
the BRI endpoint is
L3-Established.
Table 8-10. Status BRI-Port Command Interpretation — Continued
Endpoint
Types
TEI
Range Layer 2 State
Voi c e
Extension
Service
SPID Description /Recommendation
Continued on next page
To Next Page
Loading...
