Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-346 Issue 4 May 2002
Field descriptions
Mode Commands/Communication Modes. This is a collection of incoming and
outgoing bandwidth allocations for the multiplex. The Incoming data is the rate at
which the MCU thinks the endpoint is communicating based on the Bit-rate
Allocation Signal (BAS) codes received from the endpoint/codec and the
capabilities the MCU has declared. The Outgoing data is the rate from the MCU
toward the endpoint. The following are column definitions for this section of
page 3.
Broadcaster
The current broadcaster endpoint number. The following
keywords qualify the broadcaster:
“Broadcast” = A broadcast mode broadcaster.
“Chair” = The chair designates the broadcaster.
“See-Me” = The endpoint initiates a MCV broadcaster request.
“Presenter” = A presentation mode broadcaster.
“Rollcall” = The UCC designates the broadcaster by the
Rollcall feature.
“UCC” = The UCC designates the broadcaster.
“VAS” = A Voice Activated Switching broadcaster.
Next
Broadcaster
The endpoint number that is selected to be the next
broadcaster.
Return Vid
The endpoint number that is the current return video. The
return video is qualified with the following keywords:
“blank” = VAS, Chair action, UCC action, or endpoint MCV
requests force the previous broadcaster to be the return video.
The broadcaster qualifier identifies the action that forced this
endpoint to become return video.
“Autoscan” = Auto scan return video, when conference mode
broadcasts with auto scan.
“Browse” = The UCC designates the return video with the
Browse feature.
“VAS” = A Voice Activated Switching return video.
Next Return
Vid
Indicates the endpoint number selected to be the next return
video.
To Next Page
Loading...
