status conference
Issue 4 May 2002
8-347555-233-123
Field descriptions
The following are field definitions for the Mode Commands/Communication
Modes section of Page 3.
CONF
The desired conference operating mode. This may differ from
the endpoint in (
EPT-IN) or endpoint out (EPT-OUT) modes.
CMD
Labels for the various types of mode commands
STAT
Conference and incoming mode compatibility.
“y”
= mode compatibility
“n”
= modes incompatibility.
EPT-IN
defines the communication modes coming in from an endpoint.
EPT-OUT
Defines the communication modes sent to an endpoint based
on the number of connected channels and the endpoint’s
capabilities.
XRATE
One of the supported rates in Table 8-12 on page 8-347:
Table 8-12. Supported Transfer Rates
XRATE Bandwidth of the Call
2x64 2B (2x56 or 2x64)
128 112kbps or 128kbps
196 168kbps or 196kbps
256 224kbps or 256kbps
320 280kbps or 320kbps
384 336kbps or 384kbps
512 512kbps
768 768kbps
1472 1472kbps
1536 1536kbps‘
1920 1920kbps
Continued on next page
To Next Page
Loading...
