Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-424 Issue 4 May 2002
Feature Interactions
The test card-mem long command invokes the Memory Card Erase/Write/Read
Test. This means that the save translation and save announcement commands
are rejected while the write-to-memory-card operation is active. This test also
invokes the Memory Card Capacity Test which determines whether the memory
card is more than 98% full. This test is also invoked after the save translation
command.
In a High or Critical Reliability System, running test card-mem command for a
memory card in the standby SPE means that the standby SPE is put into the
maintenance mode and no SPE interchange is allowed through the reset system
interchange command or scheduled SPE interchange.
Output
The following example shows the output from the test card-mem a long
command. The responses display on a test-by-test basis with one line of data for
each test result.
test card-mem a long SPE A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A CARD-MEM 695 PASS
01A CARD-MEM 696 PASS
01A CARD-MEM 697 PASS
01A CARD-MEM 698 PASS
01A CARD-MEM 699 PASS
01A CARD-MEM 694 PASS
01A CARD-MEM 693 PASS
01A CAP-MEM 1014 PASS
FL-DATA 421 PASS
Command successfully completed
To Next Page
Loading...
