Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-498 Issue 4 May 2002
Field descriptions
clan port
This C-LAN entry identifies the port on the board from which
the traceroute command is issued.
Hop
The node number (in sequence). The first node (0) is the
address from which the traceroute command is issued.
Time (ms)
Time from the board to each intermediate destination in
milliseconds. If an error occurs at a node, the entry is
repeated with an error code immediately following the time.
Error codes and their meanings are:
■ ! Unable to reach port
■ !N Unable to reach network
■ !H Unable to reach host
■ !P Failure between endpoints
■ !F Need fragmentation of data packet
■ !S Source return failure
■ !X Packet blocked by filter
IP Address
The 32-bit network address.
To Next Page
Loading...
