Maintenance Object Repair Procedures
555-233-123
10-58 Issue 4 May 2002
1018 ABORT The test has been disabled by administration.The default for
the
Test field on the station form is y. Determine why this
field has been set to
n on this station (this may be due to the
brief ringing disturbance that this test may cause).
1. To enable the test for a particular station being tested,
enter change station extension and set the
Test? field
on the station from
n to y.
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT Could not allocate necessary system resources to run this
test.
1. Retry the command at 1-minute intervals a maximum of 5
times.
Table 10-22. TEST #48 Station Present Test — Continued
Error
Code
Te s t
Result
Description/Recommendation
Continued on next page
To Next Page
Loading...
