RX2540 M4 Upgrade and Maintenance Manual 131
Figure 43: Removing the CMA stopper
Ê Remove the CMA stopper with the mounted crossbar.
Ê Hold the CMA stopper, the crossbar and the CMA including cables in the one
hand.
Figure 44: Removing the PSU
Ê Remove the PSU and install the dummy cover carefully.
I Note for PSU1: Remove the PSU1 carefully while lifting PSU1 and
bringing PSU1 to the right, in order to avoid interference
Ê Mount the complete assembly (CMA stopper, the crossbar and the CMA)
again into the rail.
To Next Page
Loading...
