474 Upgrade and Maintenance Manual RX2540 M4
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Verifying system information backup/restore" on page 99
Ê Store your server’s system information on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see section "Using the Chassis ID Prom
Tool" on page 118.
Ê "Resuming BitLocker functionality" on page 112
14.7 Front VGA board (3.5-inch version)
14.7.1 Installing the front VGA connector
14.7.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 91
Ê "Locating the defective server" on page 53
Ê "Shutting down the server" on page 55
Ê "Disconnecting the power cord" on page 56
Ê "Getting access to the component" on page 58
Ê "Removing the fan holder" on page 233
14.7.1.2 Removing the front panel module
Ê Remove the front panel module, see section "Removing the front panel
module" on page 469.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: flat screw driver
Phillips PH1 screw driver
To Next Page
Loading...
