Fujitsu PRIMERGY RX2540 M4

RX2540 M4 Upgrade and Maintenance Manual 343
Main memory
Ê If applicable, remove the riser module, see section "Riser modules for
GPGPU cards (FL)" on page 82.
Ê "Locating the defective component" on page 54
10.4.2 Removing the defective memory module
Ê Remove the memory module, see section "Removing a memory module" on
page 341.
10.4.3 Installing a new memory module
Ê Install the memory module, see section "Installing a memory module" on
page 339.
10.4.4 Concluding steps
Ê If applicable, install the riser module, see section "Riser modules for GPGPU
cards (FL)" on page 82.
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Resetting the error status after replacing memory modules or CPUs" on
page 104
Ê "Enabling replaced components in the BIOS" on page 108
Ê "Resuming BitLocker functionality" on page 112