RX2540 M4 Upgrade and Maintenance Manual 465
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Verifying system information backup/restore" on page 99
Ê Store your server’s system information on the Chassis ID EPROM
integrated into the front panel board. For more information on how to obtain
and use the ChassisId_Prom Tool, see section "Using the Chassis ID Prom
Tool" on page 118.
Ê "Resuming BitLocker functionality" on page 112
14.5.2 Replacing the ID card holder
14.5.2.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 91
Ê "Locating the defective server" on page 53
Ê "Shutting down the server" on page 55
Ê "Disconnecting the power cord" on page 56
Ê If applicable, "Removing 2.5-inch HDD/SSD modules" on page 185.
Ê "Getting access to the component" on page 58
Ê "Removing the fan holder" on page 233
Ê Remove the backplane 3 see section "Removing the HDD backplane" on
page 191.
14.5.2.2 Removing the ID card holder
Ê Remove the ID card, see figure 409 on page 544.
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: tool-less
To Next Page
Loading...
