RX2540 M4 Upgrade and Maintenance Manual 453
14.3.2.4 Installing the front panel module
Ê Install the front panel module, see section "Replacing the front panel
module" on page 438.
14.3.2.5 Concluding steps
Ê "Installing the fan holder" on page 234
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Resuming BitLocker functionality" on page 112
14.3.3 Replacing the front VGA board
14.3.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 91
Ê "Locating the defective server" on page 53
Ê "Shutting down the server" on page 55
Ê "Disconnecting the power cord" on page 56
Ê "Getting access to the component" on page 58
Ê "Removing the fan holder" on page 233
14.3.3.2 Removing the front panel module
Ê Remove the front panel module, see section "Replacing the front panel
module" on page 438.
Upgrade and Repair Unit
(URU)
Hardware: 15 minutes
Tools: Phillips PH1 screw driver
Phillips PZ2 screw driver / hexagon screw driver 5 mm
To Next Page
Loading...
