480 Upgrade and Maintenance Manual RX2540 M4
14.7.3.6 Concluding steps
Ê "Installing the fan holder" on page 234
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Resuming BitLocker functionality" on page 112
14.8 Front USB3.0 connector (3.5-inch version)
I The maximum external cable length is limited to 3 m.
14.8.1 Installing the front USB3.0 connector
14.8.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 91
Ê "Locating the defective server" on page 53
Ê "Shutting down the server" on page 55
Ê "Disconnecting the power cord" on page 56
Ê "Getting access to the component" on page 58
Ê "Removing the fan holder" on page 233
14.8.1.2 Removing the front panel module
Ê Remove the front panel module, see section "Removing the front panel
module" on page 469.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: Phillips PZ2 screw driver / hexagon screw driver 5 mm
To Next Page
Loading...
