512 Upgrade and Maintenance Manual RX2540 M4
System board and components
16.3.3.2 Removing the defective TPM
Ê Remove the TPM, see section "Removing the TPM" on page 507.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
16.3.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM, see section "Installing the TPM" on page 503.
16.3.3.4 Concluding steps
Ê "Installing the fan holder" on page 234
Ê If applicable, install the riser module 1, see section "Handling riser modules"
on page 71.
Ê "Installing the air duct" on page 89
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
Ê "Resuming BitLocker functionality" on page 112
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
To Next Page
Loading...
