RX2540 M4 Upgrade and Maintenance Manual 327
10 Main memory
Safety notes
V CAUTION!
● Do not install unsupported third party memory modules. For more
information on supported memory modules, see section "Basic
information" on page 328. Doing so may cause electric shock, a fire,
or failures.
● Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
● Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
● If the memory module has not been correctly inserted, it may cause
a fire. Insert the memory module with attention.
● Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
● For more information, see chapter "Important information" on
page 41.
To Next Page
Loading...
