326 Upgrade and Maintenance Manual RX2540 M4
Expansion cards and backup units
9.11.6.3 Installing the new FBU
Ê Install the FBU in the holder and connect the FBU cable to the FBU, see
section "Preparing the FBU" on page 314 (to the air duct) or "Preparing the
FBU" on page 317 (to the riser card holder (FL)).
Ê Install the FBU with the holder, see section "Installing the FBU with the
holder" on page 315 (to the air duct) or section "Installing the FBU with the
holder" on page 318 (to the riser card holder (FL)).
9.11.6.4 Concluding steps
Ê "Reassembling" on page 63
Ê "Connecting the power cord" on page 67
Ê "Switching on the server" on page 70
To Next Page
Loading...
