Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

RX2540 M4 Upgrade and Maintenance Manual 135
Power supply unit (PSU)
6.2.3.2 Removing the defective hot-plug PSU
Ê Remove the PSU, see section "Removing a hot-plug PSU" on page 132.
6.2.3.3 Installing the new hot-plug PSU
Ê Install the PSU, see section "Installing a hot-plug PSU" on page 128.
6.2.3.4 Concluding steps
Ê Connect the power cord to the new PSU and secure it with a cable tie, see
section "Connecting the power cord" on page 67.
Ê Only when replacing a PSU in a non-redundant configuration: "Switching on
the server" on page 70.
Ê "Performing a fan test" on page 121

Fujitsu PRIMERGY RX2540 M4 Specifications

General

Processor	Intel Xeon Scalable Processor Family
Form Factor	2U rack server
Chipset	Intel C621
Memory	Up to 3TB DDR4
Storage	Up to 24 x 2.5-inch SAS/SATA/NVMe drives or Up to 12 x 3.5-inch SAS/SATA drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60 (with optional controller)
Expansion Slots	Up to 8x PCIe Gen3 slots
Power Supply	800W or 1200W (1+1 redundant)
Memory Type	DDR4
Management	iRMC S5 (Integrated Remote Management Controller)
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware